Pristine Clean Bags® LDPE Easy Tear
The easy tear formulation allows technicians to easily open the bag with gloved hands, avoiding potential damage caused by knives, blades and scissors. The addition of tear notches to the sides of a bag, can be used to create an easy tear bag; eliminating the use of sharps to open the bags. Available in multiple thicknesses, the bags are also available with or without re-closable zippers. LDPE is routinely used for gamma irradiated products. It is not suitable for extreme temperatures. These bags are manufactured in an ISO certified cleanroom. They are certified clean to IEST-STD 1246D.
|Physical Properties||Typical values 0.10mm±0.01mm (0.9 to 0.11)||Typical values 0.15mm±0.01mm ((0.14mm to 0.16)||Test Method|
|Density||0.92 g/cm3||0.92 g/cm3||ASTM D1505|
|Elongation||MD > 300%||> 400%||ASTM D882|
|Tensile Strength||MD > 2200psi
TD > 2200psi
|MD > 5000psi
TD > 3500psi
|Seal Strength/25mm||> 30
||> 12 lbs||ASTM F88|
|Puncture Resistance||> 6 lbs||> 13 lbs||MIL STD 3010-2065|
|Outgassing||> 3000 ng/cm3
< 300,000 ng/cm3
|> 3000 ng/cm3
< 300,000 ng/cm3
|Chloride, CL||< 10 ng/cm3||< 10 ng/cm3||HDD Industry
|Sulphate, SO4||< 10 ng/cm3||< 10 ng/cm3||HDD Industry
|Nitrate, NO3||< 20 ng/cm3||< 20 ng/cm3||HDD Industry
|Amine, Amide and Silicone||Not Detected||Not Detected||FTIR|
|NVR||> 1.5 µg/cm2||> 1.5 µg/cm2||HDD Industry
|LPC (Inside of bag tested)||> 0.5 µm > 100 counts/cm2||> 0.5 µm > 100 counts/cm2||Hand Shake 5X|
|MVTR||0.15 gm /100 in2 / 24hours||ASTM F 1249|
The values shown above were developed from random samples taken from production material. We believe them to be typical for the product.
- 21 CFR177.1520(c), paragraph 2.2 compliant
- European Commission (EU) No 10/2011 compliant as of 4/9/2012.
- Components of animal origin have not been knowingly added to this product.
- This product is not manufactured with any of the Substances on Very High Concern (SVHC).
- Complies with the requirements of Article 4.1 of EU Directive 2011/65/EU (RoHS)
- Complies with California Proposition 65
Notice: All statements, information and data given herein are believed to be reliable, but are presented without guarantee, warranty or responsibility of any kind, expressed or implied. The values presented in this data sheet are typical and are not to be interpreted as product specifications.